MACtac IMAGin
TECHNICAL DATA SHEET JT 5822 P - JT 5822 R MACTAC
Self-adhesive Digital Imaging Media for wide-format solvent-based & UV inkjet Printing.

JT 5822 P - JT 5822 R


3 year monomeric calendered vinyl

PRODUCT DESCRIPTION:

95μ White gloss, soft calendered PVC film
Permanent or Removable transparent acrylic.
Coated Kraft liner 140 gsqm backprinted MACtac.
Face material :
Adhesive :
Liner :

TYPICAL USES:

Short to medium term indoor or outdoor advertising and promotion on flat or slightly curved surfaces.

PRINTING:

Especially designed for solvent based & UV inkjet printing on wide-format printing equipment.
To achieve the best possible print quality, please make sure that the correct ICC profiles or printer settings are used.

PHYSICAL PROPERTIES OF THE UNPRINTED FILM:


Test method
FTM 9
FTM 1
 
FTM14
 
 


ISO 3795
Average values JT5822R
5.5 ± 1.5 N/25mm
5 ± 1.5 N/25mm
 
max 1.0%
 

+ 10°C
-20°C to +70°C
Self-extinguishing
Average values JT5822P
12 ± 3 N/25mm
14 ± 3 N/25mm
 
max 1.0%
 

+ 10°C
-20°C to +70°C
Self-extinguishing
Adhesive Data, 23°C
Quick Tack on glass
Peel 24 hours on glass
Dimensional stability
% Shrinkage 48 h at 70°C
(applied on aluminium)
Temperature ranges
Minimum application temperature:
Service temperature range
Flammability

SHELF LIFE:

2 years when stored at 15/25°C and 50% relative humidity (in the original packaging).

DURABILITY:

The outdoor durability of the unprinted film is 3 years(Middle European Exposure conditions, vertical exposure). Overlamination of the inkjet printed material delays eventual colour fading that may occur upon time. This colour fading is dependent from the quality of the inkjet inks and the self-adhesive materials being used.

REMOVABILITY of JT 5822 R

Up to one year, after application, on many surfaces. The removability of JT 5822 R may be affected by the following substrates: polystyrene, nitrocellulose painted surfaces and soft PVC. With such substrates an increase of adhesion over time may occur and adhesive residue on removal may be noticed. The wet method of application of large printed decals with a removable adhesive is not recommended.

RECOMMENDATIONS:

Always test your combination of JT5000 products, inks and laminating films prior to commercial use.

GENERAL REMARK: factors affecting adhesion

To ensure application suitability - always test the proposed construction under actual application and end-use conditions before going into full production. The following factors will adversely affect adhesion of a pressure-sensitive adhesive:

IMPORTANT NOTICE:

All MACtac products are subject to careful quality control throughout the manufacturing process and are warranted to be of merchantable quality and free from manufacturing defects. Published information concerning MACtac products is based upon research which the Company believes to be reliable although such information does not constitute a warranty. Because of the variety of uses of MACtac products and the continuing development of new applications, the purchaser should carefully consider the suitability and performance of the product for each intended use, and the purchaser shall assume all risks regarding such use. The seller shall not be liable for damages in excess of the purchase price of the product nor for incidental or consequential damages. All specifications are subject to change without prior notice.


www.ppmsupplies.nl