MACtac IMAGin
TECHNICAL DATA SHEET JT 5828 P - JT 5828 R MACTAC
Self-adhesive Digital Imaging Media for wide-format solvent-based & UV inkjet Printing.

JT 5828 P - JT 5828 R


4 year monomeric calendered vinyl

PRODUCT DESCRIPTION:

95μ White matt soft calendered PVC film.
Permanent or Removable opaque acrylic.
Coated Kraft liner 140 gsqm backprinted MACtac/IMAGin.
Face material :
Adhesive :
Liner :

TYPICAL USES:

Medium term, indoor or outdoor advertising and promotion on flat or slightly curved surfaces.

PRINTING

Especially designed for solvent based & UV inkjet printing on wide-format printing equipment.
To achieve the best possible print quality, please make sure that the correct ICC profiles or printer settings are used.

PHYSICAL PROPERTIES OF THE UNPRINTED FILM:


Test method
FTM 9
FTM 1
 
FTM14
 
 


ISO 3795
Applied to stainless steel
Exposed to: oils, greases, aliphatic
solvents, mild acids, mild alkalis
Repeated (each 10 min) petrol spraying.
Average values JT5828R
5 ± 2 N/25mm
3 ± 3 N/25mm
 
max 0.5%
 

+ 10°C
-40°C to +70°C
Self-extinguishing
No effect


If extended contact, edge
lifting will occur.
Average values JT5828P
14 ± 3 N/25mm
21 ± 3 N/25mm
 
max 1.0%
 

+ 10°C
-20°C to +70°C
Self-extinguishing
No effect


If extended contact, edge
lifting will occur.
Adhesive Data, 23°C
Quick Tack on glass
Peel 24 hours on glass
Dimensional stability
% Shrinkage 48 h at 70°C
(applied on aluminium)
Temperature ranges
Minimum application temperature:
Service temperature range
Flammability
Solvent resistance


Petrol Resistance



SHELF LIFE:

2 years when stored at 15/25°C and 50% relative humidity (in the original packaging).

DURABILITY:

The outdoor durability of the unprinted film is 4 years (Middle European Exposure conditions, vertical exposure). Overlamination of the inkjet printed material delays eventual colour fading that may occur upon time. This colour fading is dependent from the quality of the inkjet inks, the orientation of the printed material, the angle of display and the exact location of exposure on the Globe.

RECOMMENDATIONS:

Always test your combination of JT5000 products, inks and laminating films prior to commercial use.

GENERAL REMARK: factors affecting adhesion

To ensure application suitability - always test the proposed construction under actual application and end-use conditions before going into full production. The following factors will adversely affect adhesion of a pressure-sensitive adhesive:

IMPORTANT NOTICE:

All MACtac products are subject to careful quality control throughout the manufacturing process and are warranted to be of merchantable quality and free from manufacturing defects. Published information concerning MACtac products is based upon research which the Company believes to be reliable although such information does not constitute a warranty. Because of the variety of uses of MACtac products and the continuing development of new applications, the purchaser should carefully consider the suitability and performance of the product for each intended use, and the purchaser shall assume all risks regarding such use. The seller shall not be liable for damages in excess of the purchase price of the product nor for incidental or consequential damages. All specifications are subject to change without prior notice.


www.ppmsupplies.nl