MACtac IMAGin
TECHNICAL DATA SHEET JT 5899 RM MACTAC
Self-adhesive Digital Imaging Media for wide-format solvent-based & UV inkjet Printing.

JT 5899 RM


2 year monomeric calendered vinyl

PRODUCT DESCRIPTION:

Face material : 95μ Gloss clear soft calendered PVC film.
Adhesive : Removable clear acrylic.
Liner : White PE coated Kraft liner 130 gsqm backprinted MACtac/IMAGin in green.

TYPICAL USES:

Short to Medium term indoor or outdoor advertising and promotion on flat or slightly curved surfaces

PRINTING:

Especially designed for wide format solvent based inkjet printing using eco-solvent or mild-solvent inks such as on Mutoh Rockhopper II-4H, Mutoh Rockhopper 38, Roland Soljet Pro II, Roland VersCAMM SP-300, AGFA Grand Sherpa Universal, Seiko Colorpainter 64S, Tiara Opal II and similar printing equipment.
To achieve the best possible print quality, please make sure that the correct ICC profiles or printer settings are used.

PHYSICAL PROPERTIES OF THE UNPRINTED FILM:


Test method
FTM 9
FTM 1
 
FTM14
 
 
Average values
9 ± 2 N/25mm
10 ± 1 N/25mm
 
max 0.5%
 

+ 10°C
-40°C to +70°C
Adhesive Data, 23°C
Quick Tack on glass
Peel 24 hours on glass
Dimensional stability
% Shrinkage 48 h at 70°C
(applied on aluminium)
Temperature ranges
Minimum application temperature:
Service temperature range

SHELF LIFE:

2 years when stored at 15/25°C and 50% relative humidity (in the original packaging).

DURABILITY:

The outdoor durability of the unprinted film is 2 years (Middle European Exposure conditions, vertical exposure). Overlamination of the inkjet printed material delays eventual colour fading that may occur upon time. This colour fading is dependent from the quality of the inkjet inks and the self-adhesive materials being used.

REMOVABILITY:

2 years removability after application on many surfaces. The removability of JT 5899 R may be affected by the following substrates: polystyrene, nitrocellulose painted surfaces and soft PVC. With such substrates an increase of adhesion over time may occur and adhesive residue on removal may be noticed.

RECOMMENDATIONS:

GENERAL REMARK: factors affecting adhesion

To ensure application suitability - always test the proposed construction under actual application and end-use conditions before going into full production. The following factors will adversely affect adhesion of a pressure-sensitive adhesive:

IMPORTANT NOTICE:

All MACtac products are subject to careful quality control throughout the manufacturing process and are warranted to be of merchantable quality and free from manufacturing defects. Published information concerning MACtac products is based upon research which the Company believes to be reliable although such information does not constitute a warranty. Because of the variety of uses of MACtac products and the continuing development of new applications, the purchaser should carefully consider the suitability and performance of the product for each intended use, and the purchaser shall assume all risks regarding such use. The seller shall not be liable for damages in excess of the purchase price of the product nor for incidental or consequential damages. All specifications are subject to change without prior notice.


www.ppmsupplies.nl