MACtac IMAGin
TECHNICAL DATA SHEET LF3800
Self-adhesive products especially designed
for full-colour short-run digital printing.

PRODUCT DESCRIPTION:

LF 3898 and LF 3899 are soft 80 μ PVC films coated on one side with a clear acrylic pressure sensitive adhesive.
- LF 3898 : matt clear
- LF 3899 : gloss clear
The adhesive is protected with a white paper liner, easy to remove.

TYPICAL USES

IMAGin Laminating Films 3898 and LF 3899 are designed for overlaminating and protecting large and medium size digital prints, particularly water based inkjet prints. Suitable for interior and exterior environments, LF 3800 helps retard colour fading caused by U.V. light exposure. LF 3800 provides a uniform, matt (LF 3898) or gloss (LF 3899) finish to the prints as well as protection against potential damages such as scratching or friction, liquid spoilage, etc. LF 3800 does not influence the pH level of substrate to which it is applied.

PHYSICAL PROPERTIES:


Test method
 
FTM 9
FTM 1
FTM 1
FTM 8

FTM 14
sample mounted on aluminium
ISO 536

ISO 534 (ASTM D 645)



Average Values
LF 3898       LF 3899
14 ± 1          14 ± 1
13 ± 1          18 ± 1
14 ± 1          19 ± 1
> 500

< 0.5

80 gr/sqm

100 μ

+ 5°C to + 40°C
– 30°C to + 70°C
Adhesive Data 23°C
Quick Tack (N/25 mm)on stainless steel
Peel 180° - 20 min. (N/25 mm) on stainless steel
Peel 180° - 24 hours (N/25 mm) on stainless steel
Shear (hours)
1 kg - 25 mm x 25 mm
Dimensional stability
% shrinkage : 48 hours at 60°C
Release liner
White paper
Thickness
Film + adhesive
Temperature ranges
Application :
End-use :

N.B.: for temperatures outside those quoted above, please consult us.

FLAMMABILITY:

Self-extinguishing (sample mounted on aluminium).

CHEMICAL RESISTANCE:

Resistant to short periods of immersion in water and short contact with detergents, alcohol and some aliphatic solvents. Not recommended for use in contact with ketones, esters, aromatic and chlorinated hydrocarbons. For further technical advice, please consult us.

SHELF LIFE:

2 years when stored at 15 to 25°C and ± 50 % relative humidity (in the original packaging).

DURABILITY:

LF 3800 will give excellent performance for up to 2 years for outdoor exposure. The durability does not relate to the colours of the prints but only to the film.
Note : This estimated life time is based on accelerated ageing studies and outdoor exposure, under conditions experienced in vertical exposure and in ″normal″ temperate climates. Exposure to severe humidity and ultraviolet light, as in southern European countries, and also in tropical, sub-tropical or desert regions, will cause a more rapid deterioration. This also applies to polluted areas, high altitude and south-facing exposure.

RECOMMENDATIONS:

IMPORTANT NOTICE:

All MACtac products are subject to careful quality control throughout the manufacturing process and are warranted to be of merchantable quality and free from manufacturing defects. Published information concerning MACtac products is based upon research which the Company believes to be reliable although such information does not constitute a warranty. Because of the variety of uses of MACtac products and the continuing development of new applications, the purchaser should carefully consider the suitability and performance of the product for each intended use, and the purchaser shall assume all risks regarding such use. The seller shall not be liable for damages in excess of the purchase price of the product nor for incidental or consequential damages. All specifications are subject to change without prior notice.

www.ppmsupplies.nl