DPF 2400 VINYL FILM REFLECTIVE DIGITAL PRINT PRESSURE SENSITIVE FILM
- DPF 2400 is a 5 mil printable reflective vinyl with high initial tack, permanent pressure-sensitive adhesive.
- The film conforms well to both flat and irregular surfaces when processed and applied according to Arlon recommendations.
- DPF 2400 is rated for outdoor durability up to 7 years (unprinted) for flat surfaces and up to 5 years (unprinted) for irregular surfaces.
- Printed durability is dependent on the ink system used.
AREAS OF USE
- Meets the following specifications: DOT FP-85, Section 718; Federal Spec. L-S-300C; ASTM-D 4956-89;
- Digital printing with a wide variety of direct print systems;
- Motor and railway coaches, fleet and vehicle markings, and any surface requiring reflective vinyl film.
PERFORMANCE AND PHYSICAL DATA
TYPICAL VALUE:
80-90%
0.0061 in 0.15 mm
≥ 10.0 lb/in width ≥ 1.8 kg/cm width
≥ 110%
1 year from factory shipment
60°F to 90°F optimum
16°C to 32°C optimum
-65°F to 160°F -54°C to 71°C
No appreciable effect
No appreciable effect
No appreciable effect
≥ 4.4 lbs/in ≥ 0.78 kg/cm
40 g/2 in 8 g/cm
TEST METHODS:
Gloss Meter 60° Reflection
Micrometer, Federal Bench Type
Tensile tester with 2-in (51 mm)
jaw separation; crosshead speed of
12 in/min. (5.1 mm/s), web direction
Instron tensile Tester as above
Free from excessive moisture,
temperature, direct sunlight
On clean, dry substrate
On clean, dry substrate
1. LS-300 Method 4.4.10
2. ASTM-D4956-89
1. LS-300 Method 4.4.12
2. ASTM-D4956-89
Film applied to etched aluminum
panels 24 hours prior to testing
LS-300 Method 4.4.6
PSTC-1, 15 min, RT 70°F (21°C)
TLMI Release at 90°, 300 in/min
760 cm/min)
PROPERTY
Surface Finish
Thickness
including adhesiveTensile strength
Elongation
Shelf life
Application Temperature Range
Service Temperature Range
Humidity resistance
Fungus resistance
Gasoline resistance
Peel adhesion
Liner release
CONDITIONS OF SALE
The following is made in lieu of all warranties expressed or implied:All statements, technical information and recommendations published by Arlon, Inc. relating to PDF products are based on tests believed to be relative and within the accurary of the equipment used to obtain the specific values. Their accuracy or completeness is not guaranteed and Arlon, Inc. makes no warranty with regard threreto. Seller's and manufacturer's only responsibility shall be replace any quantity of the product proved defective. Seller and manufacturer shall not be liable for injury, loss or damage, direct or consequential, arising out of use or the inability to use the product. Nor shall seller or manufacturer be liable for any costs or expenses incurred in the processing or printing on the product. Before using user shall determine the suitability of the product for its intended use. User assumes all risk and liability of every nature in connection therewith. No statements or recommendations other than those contained in the technical information published by Arlon, Inc. shall have force or effect unless contained in an agreement manually signed by the officeres of seller and manufacturer.
www.ppmsupplies.nl