PRODUCT DATA GRAFITPRINT
GRAFITPRINT C, GRAFITPRINT P, GRAFITPRINT P SELF ADHESIVE
PRODUCT DESCRIPTION:
GRAFITPRINT is an innovative substrate for digital printing applications designed to create a faithful imitation of fresco's effects.GRAFITPRINT is available in three versions:
- GRAFITPRINT P, expressly designed for the production of singles or modular wall applied fresco's. GRAFITPRINT P is designed to be easily installed using common glues directly to the wall and allows a perfect edge-to-edge hanging of multi-panels modular fresco's.
- GRAFITPRINT P SELF ADHESIVE, ready to apply to the wall just removing the backing paper.
- GRAFITPRINT C, where the substrate is back-laminated to a canvas cloth in order to allow a tearless comfortable framing of fresco's.
ADVANTAGES:
- Innovative substrates, expressly designed for digital printing reproduction of fresco's effect;
- Canvas or polyester substrate;
- Suitable for singles or multi panels reproductions;
- Can be framed as a traditional canvas (GRAFITPRINT C);
- Self adhesive version available (only GRAFITPRINT P).
TECHNICAL DATA:
PROPERTIES | Product | |
GRAFITPRINT P | GRAFITPRINT C | |
Product composition | Cellulose polyester substrate | Cellulose polyester and cotton substrate |
Acrylic water based resins Spherical quartz ø 0.1/0.3 mm | ||
Physical form | Solid | |
Colour | White | |
Weight | Ground: ca. 80 g/m² Total: ca. 520 g/m² | Ground: ca. 155 g/m² Total: ca. 700 g/m² |
Thickness | 0,2 mm | 0,4 mm |
Dimensional stability | 100% | |
Storage | Store in dry condition and keep the roll packed in its box | |
Fire rating | M1 | in process |
Ink compatibility | Aqueous (pigmented and dye-based), solvent, mild solvent, UV-curing inks | |
Roll sizes | 1.00 x 25 meter | 1.00 x 25 meter |
INSTALLATIONS:
GRAFITPRINT P can be easily applied over most surfaces as a traditional wallcovering:- walls must be dry, clean and solid;
- work in a temperate and dry room;
- apply to the wall a generous non staining paste acrylic wallcovering adhesive using a medium fibre roller;
- leave the glue 10-15 minutes on the wall before hanging the product in order to increase its tack;
- hang GRAFITPRINT P (in case of modular fresco's, lengths edge-to-edge without overlapping);
- use a dry roller (felt, rubber) or a spatula to install GRAFITPRINT P on the wall and remove air bubbles which may appear;
- excess of glue on the edges must be immediately removed with a wet sponge and the length must be dried with a dry cloth;
- if needed, use a small soft roller to seal the seams.
GRAFITPRINT P SELF ADHESIVE can be comfortably installed as follows:
- walls must be dry, clean and solid;
- work in a temperate and dry room;
- remove 2-3 cm of backing paper and place GRAFITPRINT P SELF ADHESIVE in the required position;
- apply GRAFITPRINT P SELF ADHESIVE to the wall removing the backing paper little by little and using a light pressure (in case of modular fresco's, lengths edge-to-edge without overlapping);
- press GRAFITPRINT P SELF ADHESIVE with a dry roller (felt, rubber) or a spatula in order to ensure a good adhesion;
- if needed, use a small soft roller to seal the seams.
GRAFITPRINT C framed
GRAFITPRINT C can be framed as a traditional canvas substrate.www.ppmsupplies.nl